AnasBrass honeycomb vent Looks Very Nice
SatheeshMRI/RF doors are shining with handles, Thank you My friend.
25mm Width Double Sided Conductive Copper Tape 0.1mm Antistatic
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|0.1mm Thickness 50mm Width 50m Length Conductive Adhesive Copper Tape
|RF Shielding Room
|Conductive Or Unconductive
antistatic double sided conductive copper tape,
0.1mm double sided conductive copper tape,
25mm width copper foil tape
0.1mm Thickness 50mm Width 50m Length Conductive Adhesive Copper Tape
Many EMI problems can be solved easily with Mu-copper foil or tape. Mu-copper tape is available with or without (conductive) self-adhesive and an optional insulation layer. Mu-copper tape can be cut to any width starting at 3mm and can be delivered from stock. The most commonly used width is 25mm; standard roll length is 16.5 meters.
When large surfaces are to be shielded, it is recommended to cover most of the surface with Mu-copper foil, possibly in combination with tape with a conductive self-adhesive. This solution is much cheaper than covering the entire surface with tape strips.
Mu-copper tape can also be delivered as die-cut, according to your drawing, on strips or in pieces (as stickers), with optional self-adhesive. Almost every shape and size is possible.
EMI shielding of plastic enclosure parts
EMI shielding tape/gasket
Shielding of all non-conductive materials Ground plane
Anti-static floors (ESD floors)
Electrical connection between surfaces
Shielding in housings and Faraday cages
Temporary shielding during tests
Mounting transparent foils and windows for EMI/RFI shielding
Cable shielding (tape wrapped around cable)
Temporary shielding during emissions and immunity tests
Many factors influence the actual effectiveness of an EMI/RFI shielding tape after it has been applied, such as the type and thickness of foil, type of adhesive, closeness of contact, smoothness of application surface, strength, and frequency of the EMI/RFI signal, etc. Still, attenuation values can be determined using standard tests and fixtures.
For EMI/RFI shielding tape, typical shielding effectiveness (far field) is in the range of 60dB to 80dB (10 kHz to 20 GHz).
Suitable for all kinds of transformers, mobile phones, computers, PDA, PDP, LCD monitors, notebook computers, photocopiers,
and other electronic products where domestic electromagnetic shielding.
The copper foil tape Is a metal tape, mainly used in electromagnetic shielding,that is electrical shielding and magnetic signals of shielded two kinds,
Electrical shielding mainly relies on conductive properties of copper itself, which is excellent, But magnetic shielding foil relies on conductive substance "Nickel ",
which is on the surface of acrylic adhesive, to achieve magnetic shielding effect. Copper foil tape is widely used in mobile phones, notebook computers,
and other digital products. Currently, on the market most commonly used copper foil tape, general test performance is as follows: copper foil tape Material: CU 99.98%.
|Initial adhesion tester
|Electronic Stripping Tester