BEIJING, CHINA – Jovvi (Beijing Hengtai Tech Co., Ltd.), a global leader in electromagnetic shielding solutions, has announced a significant technical breakthrough: the successful development of a high-performance power line filter that delivers exceptional shielding effectiveness in the challenging low-frequency range. This innovation addresses a critical industry challenge—effective EMI (electromagnetic interference) suppression at lower frequencies—and demonstrates the technical professionalism of Jovvi's engineering team and the company's unwavering commitment to premium-quality materials.
Engineering Excellence in Low-Frequency EMI Suppression
Achieving high attenuation in the low-frequency spectrum (typically below 150 kHz) presents a formidable challenge for EMI filter design. Conventional passive filters require large and bulky components such as chokes and capacitors to achieve adequate performance at these frequencies, which conflicts with the growing demand for compact, high-power-density electronic systems . Jovvi's engineering team has overcome this limitation through a sophisticated hybrid approach, combining advanced active filtering techniques with carefully selected premium passive components.
The team's research focused on optimizing filter topology for the low-frequency band where common-mode (CM) conducted emissions are particularly difficult to suppress. Jovvi's new power filter leverages a voltage-sensing and current-compensation (VSCC) architecture, a topology recognized as highly effective for CM noise mitigation . By integrating an active circuit with a compact passive filter section, the new design achieves high attenuation without the bulk traditionally associated with multi-stage passive filters.
Key technical achievements include:
-
Superior Attenuation in the Low-Frequency Band: The filter demonstrates exceptional common-mode noise reduction in the frequency range critical for medical imaging equipment, industrial power systems, and precision measurement instruments. Drawing on industry benchmarks where advanced active filters have achieved 20 dB to 30 dB attenuation from 150 kHz to 10 MHz , Jovvi's solution pushes performance boundaries further, ensuring stable operation for sensitive electronics.
-
Compact, High-Power-Density Design: By employing active filtering technology, Jovvi's team significantly reduced the size and weight of the filter compared to conventional passive-only solutions. Research in the field shows that active EMI filters can reduce the volume of filtering components by as much as 76% while maintaining the same or superior attenuation . This compact design is particularly valuable for applications where space is at a premium, such as MRI rooms and medical imaging facilities.
-
Wideband Performance with Low-Frequency Focus: The filter's design ensures robust attenuation across a broad spectrum, with a specific emphasis on the low-frequency range where passive filters struggle. It effectively addresses conducted emissions from power conversion systems, a growing concern as switching frequencies increase with the adoption of wide-bandgap semiconductors like GaN and SiC .
Professional Team Driving Innovation
Jovvi's technical team, comprising engineers with deep expertise in electromagnetic compatibility (EMC), power electronics, and filter design, spearheaded this development. The team employed advanced simulation platforms and rigorous empirical testing to model filter behavior and optimize performance before prototyping.
"Our engineers approached the low-frequency shielding challenge with a systematic methodology," a Jovvi technical lead commented. "We combined theoretical analysis with extensive laboratory testing to ensure our filter design not only meets but exceeds industry standards. The development of this high-performance filter is a testament to our team's dedication to solving complex technical problems and delivering solutions that enhance the reliability of our clients' systems."
The team's expertise was crucial in navigating the trade-offs inherent in active filter design, such as balancing attenuation performance with stability and cost. The resulting filter is optimized for real-world applications, providing consistent and reliable noise suppression even under variable load conditions.
Premium-Grade Materials Ensuring Superior Performance
The success of the power filter is underpinned by Jovvi's commitment to material quality. The filter integrates a carefully selected combination of high-grade passive and active components:
-
High-Permeability Magnetic Cores: The filter employs specialized ferrite and nanocrystalline core materials that provide high impedance at low frequencies while maintaining low core losses, ensuring efficient noise suppression without excessive heat generation.
-
High-Reliability Capacitive Elements: The filter integrates capacitors with low equivalent series resistance (ESR) and stable temperature characteristics, ensuring effective high-frequency bypassing and consistent performance across varying operating conditions.
-
Precision-Wound Inductors: Inductor windings are manufactured with tightly controlled tolerances to achieve consistent inductance values and minimize parasitic capacitance, critical for maintaining performance across the frequency spectrum.
-
Rigorous Quality Assurance: Each power filter undergoes comprehensive testing, including insertion loss measurement, environmental testing (temperature and humidity), and safety compliance verification to meet CE and other international standards.
Applications and Global Impact
Jovvi's new high-shielding-effectiveness power filter is designed for critical applications requiring exceptional EMI suppression in the low-frequency range, including:
-
Medical imaging equipment (MRI, CT, X-ray systems)
-
Precision measurement and testing instruments
-
Industrial control systems and power converters
-
Research and laboratory facilities
-
Telecommunications infrastructure
With supply capability exceeding 2,000 pieces per month and delivery times of 7–14 working days, Jovvi is positioned to meet growing global demand for high-performance EMI filtering solutions. The company serves clients in more than 50 countries, offering customized filter solutions that meet the most demanding technical specifications.
A Testament to Jovvi's Technical Leadership
The successful development of this high-performance power filter reflects Jovvi's engineering expertise, dedication to innovation, and commitment to delivering the highest quality EMI shielding solutions. By combining advanced circuit design with premium materials and rigorous quality control, Jovvi continues to set the standard for electromagnetic compatibility solutions worldwide.
"This breakthrough represents our team's commitment to solving complex technical challenges through innovation and precision engineering," a Jovvi engineering lead commented. "As electromagnetic environments become increasingly demanding—particularly with the rise of high-frequency power electronics—our clients can rely on Jovvi to deliver solutions that ensure optimal system performance and reliability."
About Jovvi
Jovvi (Beijing Hengtai Tech Co., Ltd.), established in 2010, is a leading manufacturer and supplier of electromagnetic and radiation shielding solutions, including power line filters, ED copper foils, shielded doors, and complete MRI room and Faraday cage installations. With a corporate philosophy rooted in "integrity all over the world," Jovvi serves clients in more than 90 countries and regions, offering customized shielding systems that meet the most demanding technical specifications.
For more information, visit www.rf-shielded.com.